GB3HF

GB3HF 6 metre 50 MHz repeater BARNSLEY

Channel :RB6
Repeater Output : 50.760 MHz
Repeater Input : 51.260 MHz
CTCSS : B-71.9Hz
Locator : IO93HN
IRLP : N/A
Echolink : N/A
Coverage map : CLICK ME

Status

  • ON AIR
  • Keeper: Ernie G4LUE
  • Coverage: See map enclosed
  • Expected to go FM/DV mode in the future
  • Location – IO93HO


Antenna Configuration

  • Antenna: Vertical Dipole ( 0 dBd gain)
  • Single Antenna working used
  • Radiation: Omnidirectional


Repeater Equipment

  • Transmitter: Tait T336/05
  • Output Power: 10 dBW ERP
  • Receiver: Tait T335/05
  • Sensitivity: 0.2 uV / 12 dB SINAD (measured at duplexer common port; transmitter running @ 20 W output)
  • Logic: G0RDI
  • Duplexer: DPRE4-4(50) from duplexers.eu¬†replaced the homebrew¬†WB5WPA¬†design.
  • RX isolated by approx 75 dB from TX,
  • TX isolated by approx 75 dB from RX


Frequencies & Access Control

  • Input (repeater receiver) frequency: 51.260 MHz
  • Output (repeater transmitter) frequency: 50.760 MHz
  • Access by CTCSS 71.9 Hz (UK tone “B”) at peak deviation 250 Hz. Subject to change !!!
  • Continuous CTCSS tone needed for talk-through.


Controller Characteristics

G0RDI. See GB3AM Data Sheet for full details.



Tweets from SYRG Tweets from SYRG

Donate to SYRG

  • Please enter the amount you would like to donate.
  • £ 0.00
  • This field is for validation purposes and should be left unchanged.