Funcube Dongle

64MHz to 1,700MHz Software Defined Radio

As part of AMSAT-UK’s FUNcube satellite project, the FUNcube Dongle is the “ground segment”, or a radio receiver designed to allow you to try your hand at reception of satellites.

Like FUNcube, it is part of a global educational collaboration project collecting information from space.

Similar to a USB TV Dongle, the FUNcube Dongle simple fits into your computer’s USB port.

It’s compatible with many radio reception programs like Rocky, M0KGK, Spectravue and LinRad.

The FUNcube Dongle also works with Windows XP, Vista and Windows 7 both x86 and x64. In addition, it is compatible with Linux and MacOS as it uses standard USB drivers already integrated into the operating system.

There are two versions. The entry level FUNcube Dongle gives access to the satellite frequency band that FUNcube and some other satellites use.

The Pro version gives unlimited access to the frequency range 64 to 1,700MHz.

It’s also all-mode: this means that it’s not just limited to narrow band FM reception. As well as data, the FUNcube Dongle will also recieve many other narrow band signals including AM, FM and SSB. It will even receive TV sound channels!

Comments Off

DVAPdongle updates

DVAP firmware updater released.

The DVAPdongle/DV Access Point finds its self with some shiny new firmware this week.

The firmware brings about a few changes to the DVAP.

The firmware and loading tool can be downloaded from http://www.dvapdongle.com/DV_Access_Point_Dongle/Downloads.html

DvapUpdater103.zip

Download and unzip DvapUpdater103.exe onto your desktop. Double click on the program to run. Click on “Read DVAP Info” to see your current firmware version and serial number. If your firmware version is less than 1.03, click on “Update DVAP Firmware” to update.

DvapUtil102.zip

Download and unzip DvapUtil.exe onto your desktop. Set the “Center Freq” to “146.0000″ and click “Connect” to connect to the DVAP. You should see the firmware version and serial number. Click “Start” to begin sweeps of the 2M band. Click on “Show Pk” to show the peak signal readings during the test. Click “Stop” to stop the sweep.

DvapFMSetup102.zip

Select “Start->DvapFM->DvapFM” to run the program. There are two modes, local and remote. If you click on “Remote” to check, the program will record and repeat FM audio back to your radio. With “Remote” unchecked, the program will forward FM audio to your soundcard.

Many thanks to the guys at www.moetronix.com for their efforts on the DVAP

Comments Off

SYRG Picture Gallery

dsc_0132 dsc_2464 dsc_0189 dsc_0068 img_0688_0 dsc_0462_0 img_0694 dsc_0119 tower monkey dsc_0126
See more pictures here in our Gallery >>
our sponsors
Hosted by Host Yorkshire Internet